Cubro Media Converter Mini Media Converter CBR.MEDSFP-KIT

PRODUCT OVERVIEW

Cubro Media Converter provides seamless integration ofcopper and fibre, and different fibre types in Enterprise LAN networks. It supports a wide variety of protocols, data rates and media types to create a more reliable and cost-effective network. SFP – SFP Media converter combines data rate and provides independent connectivity with support for SFP and SFP+ transceivers.

The Cubro Media Converter defines a new level of deployment flexibility and inventory management. This sophisticated media converter enables the implementation of an extremely wide range of optical infrastructure solutions from media conversion and signal boosting to lambda conversion, Wavelength Division Multiplexing (WDM) and Optical Add/ Drop Multiplexing (OADM).

Sync-E and IEEE1588 ready

The Cubro Media Converter is also usable in Sync-E networks if no copper SFPs are used. If the network is carrying IEEE 1588 Sync traffic, a standard media converter with switches inside could cause a delay depending on the traffic load which deteriorates the quality of the sync signal. The Cubro
Media Converter has a very small delay of 500 ps and it is not dependent on the traffic load.

Functions / Benefits

Converts one media type into another media type, the most common use is optical to electrical. The media converter enables fibre to the desktop.

  • Provides fibre-to-fibre conversion from multi-mode fibre to single mode fibre
  • Enables amplification of poor signals to work over longer distances, this is a useful option especially inmultimode fibre networks
  • Converts dual fibre to a BIDI system with only one fibre to double the bandwidth of the installation.
  • Converts from one CWDM wavelength to another wavelength

PRODUCT CAPABILITIES / FEATURES

Media Conversion You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP
Supported SFP and SFP+ Gbit optical single mode Gbit optical multimode 10 Gbit optical single mode 10 Gbit optical multimode Gbit electrical STM1 – STM 64 optical OTN (OTU1, OTU2, OTU1e, OTU2e) Fibre Channel STM1/OC3 – STM64/OC192. We support any MSA conform SFP & SFP+
Full Duplex support The unit supports full duplex in line speed
Zero delay (500 ps = 10 cm cable) The unit does not add any delay or jitter/wander to the traffic
Layer 1 to Layer 7 transparent All packets pass the unit without any change.
Jumbo Frame Support Supports jumbo Ethernet frames with any size.
Rugged metal housing The unit is delivered in a rugged sized metal housing. Very slim form factor 100 x 55 x 27 mm
Power Versions The Media Converter comes with a 5V DC external power supply or can be supplied with a USB adapter. Power consumption depends on the used SFPs and ranges from 500 mA for Gbit up to 1.5 A for 10 G. USB power can only be used with Gbit SFPs.

TECHNICAL DATA / SPECIFICATIONS

Operating specifications:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, Non-condensing

Mechanical specifications:
Dimensions: 27 mm high x 100 mm deep x 55 mm wide

Electrical specifications:
5V DC external power supply or USB adapter
Power consumption is SFP dependent
Typical 500 mA for Gbit up to 1500 mA in 10 Gbit.

Certifications:
Fully RoHS compliant
CE compliant

Hiện tại không có đánh giá nào.

Hãy là người đầu tiên đánh giá “Cubro Media Converter Mini Media Converter CBR.MEDSFP-KIT”

Your email address will not be published. Required fields are marked *